Garmin GNS 430W Quick Reference Guide - Page 11

DEFAULT NAV PAGE / ANNUNCIATORS Default NAV Page Course Deviation Indicator (CDI) Active Leg of Flight Plan TO/FROM Flag User-selectable Data Fields The following symbols are used (directly below the CDI) to depict the active leg of a flight plan or direct-to: Course to a Waypoint, or Desired Course between Two Waypoints Direct-To a Waypoint Vectors-To-Final To Select a Different Data Item for any Data Field 1. With the default NAV page displayed, press the MENU key to display an options menu. 2. Turn the large right knob to highlight the "Change Fields?" option, and press the ENT key to select this option. 3. Use the large right knob to highlight the data field you wish to change. Left-hand Holding Pattern Right Procedure Turn Right-hand Holding Pattern Left Procedure Turn DME Arc to the left DME Arc to the right To Quickly Display the Default NAV Page 1. From any page, press and hold the CLR key for approximately two seconds. 4. Turn the small right knob to display the list of available data items. Continue turning the small right knob to select the desired data item from the list. 5. Press the ENT key to select the desired data item and return to the default NAV page. Bottom Row Annunciators and Messages Terrain annunciations: Ter Test, Ter N/A, Terrain, Ter INHB, and TER Fail CDI/RAIM Mode: Approach (LNAV, LNAV+V, L/VNAV, or LPV ), Oceanic (OCN), Terminal (TERM), En Route (ENR) or "0.30" (if the CDI is manu- ally set to "0.30" and not flying an ap- proach). Annunciations not applicable to the external CDI when VLOC is active. GPS Integrity Failure Navigation Source: GPS, VLOC, or GPS-PTK 6. Press the small right knob to remove the cursor from the page. Message Annunciator: Flashing (new message), On, or blank (no message) OBS Mode: Suspend (SUSP), OBS or blank (for auto-sequencing) Page Annunciator (NAV/WPT/AUX/ NRST/FPL/VNAV/PROC), Waypoint Alert ("NEXT DTK"), Turn Advisory ("LT TO xxxº"), etc. 190-00356-01 Rev H 9