Garmin GPSMAP 76C Owner's Manual - Page 86
Connecting the GPSmap 76C, to a Computer
UPC - 753759045098
View all Garmin GPSMAP 76C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
GPSmap 76C Appendix Connecting the GPSmap 76C to a Computer Lift Cover Lift Cover Universal Serial Serial 76 Bus (USB) Port Communications Port Interfacing the GPSmap 76C The GPSmap 76C is provided with interface connection to a PC using either a serial port or USB connector cable. Connection to your computer is necessary for downloading of detailed map from Garmin MapSource Map Data CDs. You can also save routes, waypoints, and tracks from the GPSmap 76C to MapSource. Refer to the MapSource User's Guide provided with your MapSource CDs. To connect to your computer using the USB connector: 1. Install the MapSource Trip and Waypoint Manager CD-ROM provided with your GPSmap 76C on your PC. USB drivers, required for USB interfacing, are installed when you run the CD-ROM. Do not connect the USB cable until these drivers have been installed. 2. Lift the USB protective cover from the back of the GPSmap 76C and insert the smaller connector on the USB cable into the matching port. 3. Connect the remaining cable end to your PC USB port. To connect to your computer using a Serial Port connector: 1. Lift the Serial Port protective cover from the back of the GPSmap 76C and insert the round indexed connector on the cable into the matching port. 2. Connect the remaining cable end to your PC Serial port or other appropriate device. 3. Set your GPSmap 76C interface setting to the appropriate interface format. Refer to Interface Setup on page 48.