Gateway E-9232T Gateway E-9232T Server User Guide - Page 36
NV RAID Configuration, Enabled, Exit the BIOS Setup utility.
View all Gateway E-9232T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
CHAPTER 4: Installing Components 5 Select the NV RAID Configuration sub-menu. The NV RAID Configuration sub-menu opens. 6 For the NV RAID Configuration option, click Enabled. 7 Select the SATA channels your hard drives are connected to and set them to Enabled. 8 Exit the BIOS Setup utility. 9 Restart your server. During the boot process you will see the following message: 10 Press F10. The RAID BIOS console opens. 11 Configure the RAID options, then exit the RAID BIOS console. 12 Reboot the server. 30
CHAPTER 4: Installing Components
30
5
Select the
NV RAID Configuration
sub-menu. The
NV RAID Configuration
sub-menu opens.
6
For the
NV RAID Configuration
option, click
Enabled
.
7
Select the SATA channels your hard drives are connected to and set them to Enabled.
8
Exit the BIOS Setup utility.
9
Restart your server. During the boot process you will see the following message:
10
Press
F10
. The
RAID BIOS console
opens.
11
Configure the RAID options, then exit the RAID BIOS console.
12
Reboot the server.