Gateway LT3114u Service Guide - Page 103

Main Module Reassembly Procedure, Replacing the CPU, Replacing the Thermal Module

Get Gateway LT3114u - 11.6inch Netbook Computer PDF manuals and user guides
UPC - 884483848164
View all Gateway LT3114u manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

Main Module Reassembly Procedure Replacing the CPU 1. Insert the CPU into the socket. IMPORTANT: be sure to align the pins correctly with the marker on the CPU. Failure to do will likely result in permanent damage to teh CPU. NOTE: If replacing only the CPU, make sure to follow the instrucitons for cleaning and replacing thermal pads as described in "Replacing the Thermal Module" on page 93. 2. Using a flat blade screw driver, rotate the CPU screw 90° counterclockwise to lock the CPU into the socket. Replacing the Thermal Module IMPORTANT: Ensure all heat pads are in place before replacing the Thermal Module. The following thermal pads are approved for use: • Eapus XR-PE 1. Remove all traces of thermal grease or pad adhesive from the CPU and thermal module using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. Chapter 3 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
Chapter 3
93
Main Module Reassembly Procedure
Replacing the CPU
1.
Insert the CPU into the socket.
IMPORTANT:
be sure to align the pins correctly with the marker on the CPU. Failure to do will likely result in
permanent damage to teh CPU.
NOTE:
If replacing only the CPU, make sure to follow the instrucitons for cleaning and replacing thermal pads
as described in “Replacing the Thermal Module” on page 93.
2.
Using a flat blade screw driver, rotate the CPU screw 90° counterclockwise to lock the CPU into the
socket.
Replacing the Thermal Module
IMPORTANT:
Ensure all heat pads are in place before replacing the Thermal Module.
The following thermal pads are approved for use:
•
Eapus XR-PE
1.
Remove all traces of thermal grease
or pad adhesive from the CPU and thermal module using a lint-free
cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent.