Gateway LT3114u Service Guide - Page 111
Replacing the LAN Board, Insert the LAN Board into the Lower Cover as shown.
UPC - 884483848164
View all Gateway LT3114u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Replacing the LAN Board 1. Connect the FFC cable to the LAN Board by pushing the cable into the connector shown. NOTE: The FFC Cable connector to the LAN board does not have a locking latch. 2. If the LVDS cable is still connected, lift the adhesive strip securing the LVDS cable in place and disconnect the cable from the Mainboard. 3. Insert the LAN Board into the Lower Cover as shown. Chapter 3 101
Chapter 3
101
Replacing the LAN Board
1.
Connect the FFC cable to the LAN Board by pushing the cable into the connector shown.
NOTE:
The FFC Cable connector to the LAN board does not have a locking latch.
2.
If the LVDS cable is still connected, lift the adhesive strip securing the LVDS cable in place and disconnect
the cable from the Mainboard.
3.
Insert the LAN Board into the Lower Cover as shown.