GE GTW810SSJWS Use and Care Manual - Page 11

WATER, Possible Causes, What To Do, GEAppliances.com - reviews

Page 11 highlights

Before you call for service... GEAppliances.com Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit GEAppliances.com. You may not need to call for service. WATER Short spray and delay  after pushing the Start button Water level seems low  Banging sound during  drain Too many suds  Possible Causes /LGZDVRSHQHGDQGFORVHG EHWZHHQF\FOHVHOHFWLRQDQG start 7KLVLVQRUPDO 'UDLQVWDQGSLSHLVWRRORZ 6RIWZDWHU 7RRPXFKGHWHUJHQW What To Do ‡ 7KLVLVQRUPDO6HHFUNCTIONALITY CHECK in the Safety Instructions section. ‡ :DWHUPD\QRWFRYHUWKHWRSOHYHORIWKHFORWKHV   This is normal for this high efficiency washer. ‡ 7KHGUDLQKRVHPXVWH[FHHGµKHLJKWDWVRPHSRLQWEHWZHHQ the washer back and the drain pipe. ‡ 7U\OHVVGHWHUJHQW ‡ 0HDVXUH\RXUGHWHUJHQWFDUHIXOO\8VHOHVVVRDSLI\RXKDYH soft water, a smaller load or a lightly soiled load. 7\SHRIGHWHUJHQW ‡ 6ZLWFKWR+LJK(IILFLHQF\GHWHUJHQWVXFKDV . Water leaks  Water temperature seems incorrect 7\SHRIGHWHUJHQW 8VLQJWRRPXFKGHWHUJHQW LQZDVKHU )LOOKRVHVRUGUDLQKRVHLV LPSURSHUO\FRQQHFWHG +RXVHKROGGUDLQPD\ EHFORJJHG 'UDLQKRVHUXEVRQZDOO &RQVWDQWZDWHUSUHVVXUH WRWKHILOOKRVHVDWWKH water source &RROHUZDWHUWHPSHUDWXUHV SURYLGHLPSURYHGHQHUJ\ HIILFLHQF\ :DWHUVXSSO\LVWXUQHGRII RULPSURSHUO\FRQQHFWHG :DWHUYDOYHVFUHHQVDUH VWRSSHGXS &RRO&ROG:DWHUZKHQ VHOHFWLQJ+RW House water heater is QRWVHWSURSHUO\ Water pumped out before /LGOLIWHGRUF\FOHZDVSXWLQ cycle is complete SDXVHIRURYHUKRXUV Water won't drain 'UDLQKRVHLVNLQNHGRU LPSURSHUO\FRQQHFWHG Washer pauses at the  beginning of cycles Washer pauses during  wash cycle 7KLVLVQRUPDO 7KH6RDN2SWLRQ ZDVFKRVHQ Washer pauses during 7KLVLVQRUPDO spin cycle ‡ 6ZLWFKWR+LJK(IILFLHQF\GHWHUJHQWVXFKDV . ‡ 8VHOHVVGHWHUJHQW8VHOHVVVRDSLI\RXKDYHVRIWZDWHU a smaller load or a lightly soiled load. ‡ 0DNHVXUHKRVHFRQQHFWLRQVDUHWLJKWDWIDXFHWVDQG rubber washers are installed. Make sure end of drain hose is correctly inserted in and secured to drain facility. ‡ &KHFNKRXVHKROGSOXPELQJ

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

WATER
Possible Causes
What To Do
Short spray and delay
FUNCTIONALITY CHECK
in the
Safety
after pushing the Start
Instructions
section.
button
start
Water level seems low
This is normal for this high efficiency washer.
Banging sound during
drain
the washer back and the drain pipe.
Too many suds
soft water, a smaller load or a lightly soiled load.
.
Water leaks
.
a smaller load or a lightly soiled load.
rubber washers are installed. Make sure end of drain hose
is correctly inserted in and secured to drain facility.
a plumber.
May cause excessive wear on the hose.
water source
every 5 years.
Water temperature
seems incorrect
with cooler water temperatures without affecting wash
performance.
are connected to correct faucets.
NOTE:
Water valves are marked
H
” and “
C
” and internal valve screens are color coded.
hoses from the upper back of the washer. Use a brush or
toothpick to clean the screens in the machine. Reconnect
the hoses and turn the water back on.
optimizes for best results. Cold water is added periodically
when hot is selected.
House water heater is
120°F–140°F (48°C–60°C).
Water pumped out before
cycle is complete
Water won’t drain
above floor.
Washer pauses at the
beginning of cycles
Washer pauses during
wash cycle
soak during these cycles to get your clothes cleaner with
less wear.
Washer pauses during
spin cycle
soapy water more efficiently.
11
GEAppliances.com
Before you call for service…
Troubleshooting Tips
Save time and money! Review the charts on the following pages,
or visit
GEAppliances.com
. You may not need to call for service.