GE JGB900 Owners Manual - Page 50

Before you call for service... ,0 Troubleshooting -tips Save time and money/. Review the charts on the following pages first and you may not need to call for service. Possible Causes Topburners do not light or do not burn evenly. Plug on rm_ge is not completely inserted in the electrical outlet. (The front right burner is Burner slits on the side of the ,0 designedto have slightly smaller flames between burner may be clogged. the 6 and 9 o'clock positions. This is normaL) hnproper burner assembly. &, Burner flames very large or yellow Surface burners light but oven does not ,0 hnproper air to gas ratio. The oven gas shut-off valve may have accidentally been moved during clemfing or moving, ,0 What To Do • Make sure elect_-ical I)lu(*-,is I)lugged,, into a lixe, properl) grounded outlet. • Remove the burner heads and clean them. Check the electrode area for burned-on l()(>d ()r grease. See the Care and cleaning of the range section. * Make sure the burner parts are installed c(>rrectlv. See the Care and cleaning of the range section. • /f range is connected to l.P gas, contact the person who installed veto" ran,_e or made the conversion. • To check the oven gas shut-off valve, remove the wamiing drawer (see the Care and cleaning of the range section) and look for the gas shut-off lever at the back of the range. Leveris sl_ownclosed PULLTOOPEN. Sealed burner models iiiii{!!!iii_i!iiiiiiiiii)i iiiiHl! iiiii m 5O