GE PP9830SJSS Use and Care Manual - Page 22
Blower Electrical Connections, Attaching A Blower, Transition Duct, Connecting The Ductwork - installation
View all GE PP9830SJSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
INSTALLATION INSTRUCTIONS Installation Instructions INSTALLING THE COOKTOP 13 ATTACHING A BLOWER TRANSITION DUCT Use a blower transition duct for all downward duct installations to connect to 6" round standard ductwork. This 31ø4" x 10" rectangle to 6" round transition duct is available at your local building supply store. • Connect the 5-pin plug on the blower assembly to the matching 5-pin receptacle on the bottom of the cooktop. Screws Screw (on other side) Install the transition duct to the blower outlet. Secure all joints with duct tape to assure an airtight seal. 14 BLOWER ELECTRICAL CONNECTIONS • Loosen the two screws and remove and discard the sheet metal strap covering the 5-pin connector on the cooktop bottom. Save the screws for reinstallation later. 5-pin connectors • Fold all wires into the electrical enclosure. Secure the enclosure with the screws removed earlier, making sure that no wires are trapped. 5-pin connectors Electrical enclosure Flexible conduit Remove screws and discard strap 15 CONNECTING THE DUCTWORK Connect the ductwork prepared in Steps 6 and 7 to the blower. 22 49-80635-1