GE WSSH300GWW Owners Manual - Page 13

Installation Instructions UNPACKING THE WASHER WARNING: Destroy the carton and plastic bags after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers causing suffocation. Place all materials in a garbage container or make materials inaccessible to children. 1. Cut the shipping carton along the dotted line along the bottom. Remove the carton. 2. Using a rug, blanket or piece of cardboard to protect the floor, lay the washer on its back. 3. Remove and save the styrofoam base and shipping plug. Base Shipping Plug 4. Carefully return the washer to an upright position. 5. Carefully move the washer to within 4 feet (122 cm) of the final location. 6. Remove the following from the back panel of the washer: 4 shipping bolts 4 spacers 1 metal "P" clamp 7. Remove the 4 plugs from the literature pack located in the drum and install them in the holes vacated by the packaging spacers. Save all bolts, washers, spacers, brackets, clamps and blocks for future use. NOTE: If you must transport the washer at a later date, you must reinstall the shipping support hardware to prevent shipping damage. Keep the hardware in the plastic bag provided. Power Cord Metal "P" Clamp 4 Shipping Bolts 4 Spacers 13