Genie ChainLift 600 Owner's Manual - Page 3

TABLE OF CONTENTS SECTION PAGE SAFETY INFORMATION 2 OPENER FEATURES 3 SAFETY FEATURES 3 PRE-INSTALLATION CHECK LIST 4-5 RECOMMENDED TOOLS 6 PARTS IDENTIFICATION 6-7 KEY ILLUSTRATIONS 8 SAFETY INSTALLATION INFORMATION 9 INSTALLATION 1 OPENER ASSEMBLY 9-11 2 INSTALLATION 12-14 3 WALL BUTTON INSTALLATION 15-16 4 SAFE-T-BEAM® SYSTEM INSTALLATION 17-18 5 CONNECTING TO POWER 19 ADJUSTMENTS 6 LIMIT SWITCHES & FORCE ADJUSTMENT 20-22 KEYED EMERGENCY RELEASE 21 CONTACT REVERSE TEST 22 7 PROGRAMMING REMOTE CONTROLS 23 8 BATTERY/VISOR CLIP INSTALLATION 24 9 LIGHT BULB AND LENS INSTALLATION 24 SAFETY INSTRUCTIONS 25 MAINTENANCE & TROUBLESHOOTING 10 ROUTINE MONTHLY MAINTENANCE 25 WIRING DIAGRAM 26 TROUBLESHOOTING GUIDE - OPENER 27 TROUBLESHOOTING GUIDE - POWER HEAD LED . . . . . 28 TRANSMITTER COMPLIANCE STATEMENT 29 WARRANTY 30 *Opener MUST be installed with the included Wall Console. OPENER FEATURES INTELLICODE® Rolling Code Security System. An electronic rolling code system that enhances the security of the door opener by continuously changing the access code each time the remote control is used. The door opener responds to each new code only once. An access code copied from a working system and tried again will not control the door opener. Lighted Wall Console* Operates door opener from inside garage. (Refer to section 3) and Car2U® compatible. Follow the Homelink® or Car2U® instructions in your car owner's manual. SAFETY FEATURES Safe-T-Beam® Non-Contact Reversing System**. Puts an invisible beam across the door opening. The door stops and reverses to the full open position if anything passes through the beam. Red or green LED indicator lights on the power head provide a self diagnostic code if an operational problem exists. (Refer to Section 10.) Safe-T-Reverse® Contact Reversing System. Automatically stops and reverses a closing door within 2 seconds of contact with an object. (Refer to Section 6.) Safe-T-Stop® Timed Reversed System. Automatically opens a closing door if it fails to close completely within 30 seconds. Watch Dog™ Monitoring System. Monitors the Safe-T-Beam® system to ensure proper functionality and will automatically stop and reverse a closing door if a problem is detected. Automatic Lighting System. One bulb lighting supplies up to 75 watts of light for safer evening exits and entries. Turns ON when door is activated and automatically turns OFF 3 minutes later. Manual Emergency Release. Manually releases door from door opener. Use during a power failure or other emergency to allow manual opening and closing of door. (Refer to Section 6.) **Safe-T-Beam® Safety Reverse System MUST be installed to close door. PN# 3642036534, 02/26/2010 REV. 1 3