Gigabyte B450 AORUS PRO WIFI User Manual - Page 16

_F _ S _S 8) LED_C (RGB (RGBW) LED Strip Header) The header can be used to connect a standard 5050 RGB (RGBW) LED strip (12V/G/R/B/W), with maximum power rating of 2A (12V) and maximum length of 2m. _ 1 Pin No. 1 2 3 4 5 Definition 12V G R B W _0 F B_ USB 0_ B F_USB3 _0 F USB 0_ B RGBW LED Strip RGB LED Strip _3 U Connect your RGB (RGBW) LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of this header. Incorrect connection may lead to the damage of the LED strip. 1 1 12V 12V 9) D_LED1/D_LED2 (Digital LED Strip Headers) The headers can be used to connect a standard 5050 digital LED strip, with maximum power rating of 2A B_ (12V or 5V) and maximF_uUmSB3length of 5m or maximum number of 300 LEDs. There are 12V and 5V digital LED strips. Be sure to verify the voltage requirements of your digital LED strip and set the DLED_V_SW1 and DLED_V_SW2 jumpers accordingly. _ S F_ 1 D_LED1 1 D_LED2 Pin No. 1 2 3 4 Definition V D No Pin G Digital LED Strip Connect your digital LED strip to the header. There are 12V and 5V digital LED strips. Be sure to verify the voltage requirements of your digital LED strips and set the DLED_V_SW1 and DLED_V_SW2 jumpers accordingly. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 of the digital LED strip header. Incorrect connection may lead to the damage of the LED strip. S F_ 1 F _0 _F _0 _3 _ S _S F_USB3 _ _B _ SF _ For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 2, "BIOS Setup," "Peripherals." Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. - 16 - B_ USB 0_ B _ __ 3 SS S U S_ _ B _U _ B F_USB3 F