Gigabyte G1.Sniper 3 Manual - Page 28
ATX4P PCIe Power Connector, 5 CPU_FAN/FAN1/FAN2/FAN3/FAN4 Fan Headers
View all Gigabyte G1.Sniper 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
BIOS Switcher (X58A-OC) 1 M_SATA F_PANEL(NH) PWM Switch (X58A-OC) 3) ATX4P (PCIe Power Connector) The power connector provides auxiliary power to the onboard PCI Express x16 slots. When two or more graphics cards are installed, we recommendDItPhat you connect the SATA power cable from the power supply to the ATX4P connector to ensure system1 2s3tability. For 4-way CrossFireX™/SLI, you must connect the ATX4P connector. 1 DIP 1 23 PCIe power connector (SATA)(X58A-OC) DIP 1 23 1 DIP 1 23 1 Voltage measurement module(X58A-OC) DB_PORT Pin No. Definition 1 NC BIOS Switcher (SW4) 2 NC 1 3 NC 4 GND 5 GND 15 6 GND 7 VCC Voltage measurement points(G1.Sniper 3) 8 VCC 9 VCC 10 GND 11 GND 12 GND 13 +12V 14 +12V 15 +12V F_AUDIO(H) F_USB30 TPM w/housing 4/5) CPU_FAN/FAN1/FAN2/FAN3/FAN4 (Fan Headers) All fan headers on this motherboard are 4-pin and support fan speed control function. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis. 1 CPU_FAN CPU_FAN: Pin No. Definition 1 GND 2 +12V /Speed Control 3 Sense 4 Speed Control 1 FAN2/FAN3 1 FAN1/FAN4 FAN1/FAN2/FAN3/FAN4: Pin No. Definition 1 GND 2 +12V /Speed Control 3 Sense 4 Reserve •• Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating may result in damage to the CPU or the system may hang. •• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers. Hardware Installation - 28 -