Gigabyte G210-H4G Manual
Gigabyte G210-H4G Manual
 |
View all Gigabyte G210-H4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte G210-H4G manual content summary:
- Gigabyte G210-H4G | Manual - Page 1
G210-H4G Four hot-pluggable systems (nodes) Dual LGA1150 socket motherboard for Intel® Xeon® series processors Service Guide Rev. 1.0 - Gigabyte G210-H4G | Manual - Page 2
to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted detailed product information, carefully read the Serice Guide. For product-related information, check on our website at: - Gigabyte G210-H4G | Manual - Page 3
Preface Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CON- FIGURATION decided for GIGABYTE's "global" product offering. To better fit local - Gigabyte G210-H4G | Manual - Page 4
Table of Contents Box Contents...6 Safety, Care and Regulatory Information 7 Chapter 1 Hardware Installation 10 1-1 Installation Precautions 10 1-2 Product Specifications (Per Node 11 Chapter 2 System Hardware Installation 13 2-1 System Components 14 2-2 Replacing Power Supply Board Cage Cover - Gigabyte G210-H4G | Manual - Page 5
73 5-3-2-1 PCI Express Configuration 75 5-3-2-2 USB Configuration 76 5-3-3 Intel Server Platform Services 77 5-4 Security Menu 78 5-4-1 Secure Boot menu 79 5-4-1-1 Image Execution Policy CSM Parameters ...94 5-8 Exit Menu...96 5-9 BIOS Beep Codes 97 5-10 BIOS Recovery Instruction 98 - 5 - - Gigabyte G210-H4G | Manual - Page 6
Box Contents Server System Driver CD User's Manual Rail Kit 4 x Heat sinks • The box contents above are for reference only and the actual items shall depend on the product package you obtain. The - Gigabyte G210-H4G | Manual - Page 7
safely when it is used in accordance with its marked electricalratings and product usage instructions • Do not use this product near water or a heat source.* Set specified in the product's documentation. • Only authorized service technicians should repair laser devices. Precaution for Product with - Gigabyte G210-H4G | Manual - Page 8
and, if not installed and used in accordance withthe instruction manual, may cause harmful interference to radio communications. Operation of causes harm to the telephone network, the Telephone Company maydiscontinue your service temporarily. If possible, they will notify in advance. But, if - Gigabyte G210-H4G | Manual - Page 9
environment. This equipmentgenerate, uses, and can radiate radio frequency energy, and if not installed and used in accordancewith the instructions, may cause harmful interference to radio communication. Operation of thisequipment in a residential area is likely to cause harmful interference - Gigabyte G210-H4G | Manual - Page 10
of electrostatic discharge (ESD). Prior to installation, carefully read the service guide and follow these procedures: • Prior to installation, do not remove are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. - Gigabyte G210-H4G | Manual - Page 11
ŠŠ 1 x Trusted Platform Module connector ŠŠ 1 x Front panel VGA header ŠŠ 1 x HDMI connector The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio output. You can use this port to connect your HDMI - Gigabyte G210-H4G | Manual - Page 12
CPU/System temperature detection ŠŠ CPU/System fan speed detection ŠŠ CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. ŠŠ 64 Mb flash ŠŠ AMI BIOS ŠŠ Operating Temperature: 5oC to 35oC ŠŠ Non-operating - Gigabyte G210-H4G | Manual - Page 13
Chapter 2 System Hardware Installation Pre-installation Instructions Perform the steps below before you open the server or before you remove or replaceany component. • Back up all important system and data files before - Gigabyte G210-H4G | Manual - Page 14
2-1 System Components 1 2 53 64 7 76 3 4 5 Item Decription 1. Power module 2. Power supply board cage 3. Fan duct 4. GPU cooling fan 5. GPGPU card 6. System fans 7. Hard drive Hardware Installation - 14 - - Gigabyte G210-H4G | Manual - Page 15
you remove or install the power supply board cage cover • Make sure the system is not turned on or connected to AC power. Follow these instructions to remove the power supply board cage cover: 1. Loosen and remove the screw securing the cover. 2. Holding the cage and vertically lift it from the - Gigabyte G210-H4G | Manual - Page 16
2-3 Replacing the Motherboard Tray Follow these instructions to replace the motherboard tray: 1. Disconnect the power, SATA, front panel, and mainboard cable connectors. 2. Press the retaining clip on the left side of the - Gigabyte G210-H4G | Manual - Page 17
2-4 Removing and Installing the Fan Duct Follow these instructions to remove/install the fan duct: 1. Lift up to remove the fan duct 2. To install the fan duct, align the fan duct with the guiding groove. Push down the fan duct into chassis until its firmly seats. Hardware Installation - 17 - - Gigabyte G210-H4G | Manual - Page 18
before you begin to install the CPU: • Make sure that the motherboard supports the CPU. • Always turn off the computer and unplug the power cord a flat and stable surface. • Open the system according to the instructions. WARNING! Failure to properly turn off the server before you start installing - Gigabyte G210-H4G | Manual - Page 19
2-6 Installing the Heat Sink Follow these instructions to install the heat sinks: 1. Apply thermal compound evenly on the top of the CPU. 2. Remove the protective cover from the underside of the heat - Gigabyte G210-H4G | Manual - Page 20
unable to insert the memory, switch the direction. 2-7-1 Dual Channel Memory Configuration This motherboard provides two DDR3 memory sockets and supports Dual Channel Technology. When the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling - Gigabyte G210-H4G | Manual - Page 21
the power cord from the power outlet to prevent damage to the memory module. Be sure to install DDR3 DIMMs on this motherboard. Follow these instructions to install the Memory: 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down. 2. Close the plastic clip at both edges - Gigabyte G210-H4G | Manual - Page 22
Follow these instructions to GPGPU card: 1. Attach the mini card to the riser bracket and fix the mini card with screws. 2. Attach the support bracket with two screws to the GPGPU card. 3. Insert the GPGPU card to the mini card slot 4. Orient the GPGPU card with the riser guide - Gigabyte G210-H4G | Manual - Page 23
4 3 5 - 23 - Hardware Installation - Gigabyte G210-H4G | Manual - Page 24
not fit back into the bay if inserted incorrectly. • Make sure that the HDD is connected to the HDD connector on the backplane. Follow these instructions to Hard disk drive: 1. Press the release button. 2. Pull the locking lever to remove the HDD tray. 3. Slide hard disk into blank. 4. Secure the - Gigabyte G210-H4G | Manual - Page 25
2-10 Replacing the Power Supply Follow these instructions to replace the power supply: 1. Disconnect the three power cables. 2. Pull up the power supply handle. 3. Press the retaining clip on the right side of - Gigabyte G210-H4G | Manual - Page 26
Chapter 3 System Appearance 3-1 Front View 3 1 42 5 5 3 1 42 3 12 4 No. Decription 1 ID button and LED 2. Power button and LED 3. VGA port 4. USB 3.0 ports 5. HDD bays 3 12 4 3-2 Rear View 1 2 3 46 5 7 8 9 2 13 46 5 7 8 2 1 35 78 46 2 13 5 78 46 No. Decription 1 VGA port 2. - Gigabyte G210-H4G | Manual - Page 27
3-3 HDD and Nodes Connection 1 3 2 4 - 27 - Hardware Installation - Gigabyte G210-H4G | Manual - Page 28
3-4 Front Panel LED and Buttons 1 2 No. Name Color Power button Amber 1. and LED Green 2. ID button Blue and LED N/A Status On Blink On On Off Critical Event Description System has power applied to it or ACPI No S0 state Yes System is in ACPI S5 state (Power off) System has power - Gigabyte G210-H4G | Manual - Page 29
ACPI S4 state (hlbernate mode) On N/A Unit selected for identification. Off N/A No identification. Press this button to reset the system. The NMI button allows a technician servicing the server to generate a NMI to the processor to help solve server errors. Hardware Installation - 29 - - Gigabyte G210-H4G | Manual - Page 30
3-6 Rear System LAN LEDs 1 21 2 No. Name 1 Speed LED Color Yellow Green N/A 2. Link/ Activity LED Green N/A Status On Blink On Blink Off On Blink Off Description 1 Gbps data rate Identify 1 Gbps data rate 100 Mbps data rate Identify 100 Mbps data rate 10 Mbps data rate Link between system - Gigabyte G210-H4G | Manual - Page 31
3-7 Hard Disk Drive LEDs 1 2 LED Mode No. Non-RAID Onboard RAID 1 SAS RAID Card 2 Reserve Description Hard disk drive is not present Hard disk drive is present but not active Hard disk drive is present and active Hard disk drive is not present Hard disk drive is present but not active Hard disk - Gigabyte G210-H4G | Manual - Page 32
Chapter 4 Motherboard Components 4-1 GA-6LISL Motherboard Components 1 2 3 456 7 9 8 10 36 12 11 13 33 14 35 34 32 31 30 15 29 24 23 28 22 27 16 26 25 21 20 19 18 17 - 32 - Hardware Installation - Gigabyte G210-H4G | Manual - Page 33
connector System fan connector#2 System fan connector#3 PMBus connector Intel LGA1150 socket Intel C226 chipset USB 3.0 header SATA port 4 DOM support jumper Case open intrusion header HDMI connector* Battery power cable connector SATA 6Gb/s connectors USB 2.0 header SATA SGPIO header Clear CMOS - Gigabyte G210-H4G | Manual - Page 34
4-2 Jumper Setting 5 3 2 4 1 No. Jumper Code Jumper Setting CAUTION! If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2. If the SATA DOM power is supplied by external power, set the jumper to pin 2-3. 1. SATA_DOM4 (SATA port 4 DOM Jumpers) If a SATA type hard - Gigabyte G210-H4G | Manual - Page 35
Setup program, press the key during the POST when the power is turned on. • BIOS flashing is potentially risky, if you do not encounter problems of using the current BIOS version, it is recommended that you don't flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS - Gigabyte G210-H4G | Manual - Page 36
Main This setup page includes all the items in standard compatible BIOS. Advanced This setup page includes all the items of AMI BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.) Chipset This setup page includes all the - Gigabyte G210-H4G | Manual - Page 37
5-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom - Gigabyte G210-H4G | Manual - Page 38
BIOS Information BIOS Version Display version number of the BIOS setup utility. BIOS Build Date and Time Displays the date and time when the BIOS setup utility was created. BMC Information BMC Firmware Version Display version number of the BMC setup utility. SDR Version Display the SDR version of - Gigabyte G210-H4G | Manual - Page 39
5-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. BIOS Setup - 39 - - Gigabyte G210-H4G | Manual - Page 40
5-2-1 ACPI Configuration ACPI Settings ACPI Sleep State Select the highest ACPI sleep state the system will enter, when the suspend button is pressed. Options available: Suspend Disabled/S1 only (CPU Stop Clock) for OS to choose from. Default setting is S1 only (CPU Stop Clock). BIOS Setup - 40 - - Gigabyte G210-H4G | Manual - Page 41
5-2-2 Trusted Computing (Optional) Configuration Security Device Support Select Enabled to activate TPM support feature. Options available: Enabled/Disabled. Default setting is Disabled. Current Status Information Display current TPM status information. BIOS Setup - 41 - - Gigabyte G210-H4G | Manual - Page 42
5-2-3 PCI Subsystem Settings PCI Express Slot #1 I/O ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Options available: Enabled/Disabled. Default setting is Enabled. Onboard LAN I/O ROM Option Configure onboard LAN devices and initialize device - Gigabyte G210-H4G | Manual - Page 43
VGA Palette Snoop Enable/Disable VGA Palette Tegisters Snooping. Options available: Enabled/Disabled. Default setting is Disabled. PERR Generation When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI. Options available: Enabled/Disabled. Default setting is - Gigabyte G210-H4G | Manual - Page 44
5-2-3-1 PCI Express Settings PCI Express Device Register Settings Relaxed Ordering Enable/DIsable PCI Express Device Relaxed Ordering feature. Options available: Enabled/Disabled. Default setting is Disabled. Extended Tag Wnen this feature is enabled, the system will allow device to use 8-bit Tag - Gigabyte G210-H4G | Manual - Page 45
Link Training Retry Define the number of Retry Attempts software wil take to retrain the link if previous training attempt was unsuccessful. Press / keys to increase or decrease the desired values. Link Training Timeout (us) Define the number of Microseconds software will wait before polling - Gigabyte G210-H4G | Manual - Page 46
5-2-4 CPU Configuration BIOS Setup - 46 - - Gigabyte G210-H4G | Manual - Page 47
Displays the technical specifications for the installed processor. 64-bit Display the supported information of installed CPU. EIST Technology Display Intel EIST Technology function support information. CPU C3 state Display the support information of CPU C3 state feature. CPU C6 state Display the - Gigabyte G210-H4G | Manual - Page 48
Enabled. CPU AES Enable/Disable CPU Advanced Encryption Standard instructions. Options available: Enabled/Disabled. Default setting is Enabled. (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel - Gigabyte G210-H4G | Manual - Page 49
, CPU will save more power but lose more performance. Note: This register will be changed by OS too if OS support it like Windows 2008 or newer Linux. Options available: Performance : Write value 0 into MSR_ENERGY_PERFORMANCE_BIAS Balanced Performance: Write value 7 into MSR_ENERGY_PERFORMANCE_BIAS - Gigabyte G210-H4G | Manual - Page 50
state for the C-State package limit. Options available: C0/C1/C3/C6/C7/C7s/C8/C9/C10/Auto. Default setting is Auto. Intel TXT (LT) Support Enable/Disable Intel TXT (LT) support. Options available: Enabled/Disabled. Default setting is Disabled. ACPI T State Enable/Disable ACPI T state - Gigabyte G210-H4G | Manual - Page 51
5-2-5 SATA Configuration BIOS Setup - 51 - - Gigabyte G210-H4G | Manual - Page 52
is ACHI Mode. SATA Test Mode Enable/Disable SATA Test Mode. Options available: Enabled/Disabled. Default setting is Disabled. Aggressive LPM Support Enable PCH to aggressively enter link power state. Options available: Enabled/Disabled. Default setting is Enabled. SATA Controller Speed Indicates the - Gigabyte G210-H4G | Manual - Page 53
5-2-5-1 Software Feature Mask Configuration RAID 0 Enable/Disable RAID 0 feature. Options available: Enabled/Disabled. Default setting is Enabled. RAID 1 Enable/Disable RAID 1 feature. Options available: Enabled/Disabled. Default setting is Enabled. RAID 10 Enable/Disable RAID 10 feature. Options - Gigabyte G210-H4G | Manual - Page 54
LED Locate When this item is enabled, the LED/SGPIO hardware is attached and ping to locate feature is enabled on the OS. Options available: Enabled/Disabled. Default setting is Enabled. IRRT Only on eSATA When this item is enabled, only IRRT volumes can span internal and eSATA drives. If disabled, - Gigabyte G210-H4G | Manual - Page 55
Options available: 0/1/2/3/4/5/6/78/9/10/Util Press ESC. Default setting isUntil Press ESC. Error Message Report Info Error Message Enable/Disable Info Error Message support. Options available: Enabled/Disabled. Default setting is Enabled. Summary Screen Summary Screen Enable/Disable Summary Screen - Gigabyte G210-H4G | Manual - Page 56
legacy USB devices. Options available: Auto/Enabled/Disabled. Default setting is Enabled. XHCI Hand-off Enable/Disable XHCI (USB 3.0) Hand-off support. Options available: Enabled/Disabled. Default setting is Enabled. EHCI Hand-off Enable/Disable EHCI (USB 2.0) Hand-off function. Options available - Gigabyte G210-H4G | Manual - Page 57
5-2-8 Super IO Configuration BIOS Setup - 57 - - Gigabyte G210-H4G | Manual - Page 58
Super IO Chip Display the model name of Super IO chip. Serial Port 0 Configuration Serial Port 0 When enabled allows you to configure the serial port settings. When set to Disabled, displays no configuration for the serial port. Options available: Enabled/Disabled. Default setting is Enabled. Device - Gigabyte G210-H4G | Manual - Page 59
5-2-9 Serial Port Console Redirection BIOS Setup - 59 - - Gigabyte G210-H4G | Manual - Page 60
COM1/Serial Port for Out-of Band Management/Windows Emergency Management Service (EMS) Console Redirection (Note) Select whether to enable console redirection for specified device. Console redirection enables users to manage the system from a remote location. Options - Gigabyte G210-H4G | Manual - Page 61
None/Hardware RTS/CTS. VT-UTF8 Combo Key Support (Note) Enable/Disable VT-UTF8 Combo Key Support. Options available: Enabled/Disabled. Default setting is Always Enable. Out-of-Bnad Mgmt Port Microsoft Windows Emerency Management Service (EMS) allows for remote management of a Windows Server OS - Gigabyte G210-H4G | Manual - Page 62
(Note) Enable/Disable Ipv4 PXE feature. Options available: Enabled/DIsabled. Default setting is Enabled. Ipv6 PXE Support(Note) Enable/Disable Ipv6 PXE feature. Options available: Enabled/DIsabled. Default setting is Enabled. (Note) This item appears when Network Stack is set to Enabled. - Gigabyte G210-H4G | Manual - Page 63
5-2-11 iSCSI Configuration iSCSI Initiator Name Add an Attempts Press [Enter] for configuration of advanced items. Delete Attempts Press [Enter] for configuration of advanced items. Change Attempt Order Press [Enter] for configuration of advanced items. BIOS Setup - 63 - - Gigabyte G210-H4G | Manual - Page 64
5-2-12 Intel (R) I210 Gigabit Network Connection BIOS Setup - 64 - - Gigabyte G210-H4G | Manual - Page 65
PORT CONFIGURATION MENU NIC Configuration Press [Enter] for configuration of advanced items. Blink LEDs (range 0-15 seconds) Blink LEDs for the specified duration (up to 15 seconds). Press the numberic keys to input the desired value. PORT CONFIGURATION INFORMATION UEFI Driver Display the UEFI - Gigabyte G210-H4G | Manual - Page 66
5-3 Chipset Menu The Chipset menu display submenu options for configuring the function of North Bridge and South Bridge. Select a submenu item, then press Enter to access the related submenu screen. BIOS Setup - 66 - - Gigabyte G210-H4G | Manual - Page 67
(SA) Bridge Name. System Agent RC Version Display the version number of System Agent RC. VT-d Capability Display the VT-d support information. VT-d Enable/Disable Intel Virtualization Technology for Directed I/O (VT-d) feature. Options available: Enabled/DIsabled. Default setting is Enabled. Options - Gigabyte G210-H4G | Manual - Page 68
5-3-1-1 Graphic Configuration Graphic Configuration Primary Display Device Configure the Primary display device. Options available: Auto/IGFX(if the CPU support graphic)/PEG/Onboard VGA. Default setting is Auto. BIOS Setup - 68 - - Gigabyte G210-H4G | Manual - Page 69
5-3-1-2 NB PCIe Configuration NB PCIe Configuration PEG0 Display PEG0 configuration information. PEG0 - Gen X Configure PEG0 B0:D1:F0 Gen1-Gen3. Options available: Auto/Gen1/Gen2/Gen3. Default setting is Auto. PEG1 Display PEG1 configuration information. PEG1 - Gen X Configure PEG1 B0:D1:F1 Gen1- - Gigabyte G210-H4G | Manual - Page 70
. This has no effect if PEG is not the currently active device. Options available: Enabled/Disabled. Default setting is Disabled. PEG1 - ASPM Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device. Options available: Enabled/Disabled. Default setting is - Gigabyte G210-H4G | Manual - Page 71
5-3-1-3 Memory Configuration Memory Information Memory RC Version Display version number of installed memeory. Memory Frequency Display the frequency information of installed memory. Total Memory Determines how much total memory is present during the POST. Memory Voltage Display the voltage - Gigabyte G210-H4G | Manual - Page 72
Memory Frequency Limiter Maximum Memory Frequency Selections in Mhz. Options available: Auto/1067/1333/1600/1867/2133/2400/2667. Default setting is Auto. Max TOLUD Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller - Gigabyte G210-H4G | Manual - Page 73
5-3-2 PCH-IO Configuration Intel PCH RC Version/Intel PCH SKU/Intel PCH Rev ID Information Displays the RC version, SKU and Reverison ID information of PCH. PCI Express Configuration Press [Enter] for configuration of advanced items. USB Configuration Press [Enter] for configuration of advanced - Gigabyte G210-H4G | Manual - Page 74
SLP_S4 Assertion Width Select a minimum assertion width of the SLP_S4# signal. Options available: 1-2 Seconds/2-3 Seconds/3-4 Seconds/4-5 Seconds. Default setting is 4-5 Seconds. Restore AC Power Loss This option provides user to set the mode of operation if an AC / power loss occurs. Power On: - Gigabyte G210-H4G | Manual - Page 75
5-3-2-1 PCI Express Configuration PCI Express Clock Gating Enable/Disable PCI Express Clock Gating for each root port. Options available: Enabled/Disabled. Default setting is Enabled. DMI Link ASPM Control The control of Active State Power Management on both NB side and SB side of the DMI Link. - Gigabyte G210-H4G | Manual - Page 76
: Enabled/Disabled. Default setting is Disabled. XHCI Mode Mode of operation of xHCI controller. Options available: Smart Auto/Auto/Enabled/Disabled/Manual. Default setting is Smart Auto. BTCG Options available: Enabled/Disabled. Default setting is Enabled. USB Ports Per-Port Disable Control Control - Gigabyte G210-H4G | Manual - Page 77
5-3-3 Intel Server Platform Services Intel Server Platform Services Enable/Disable Intel Server Platform Services Help. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 77 - - Gigabyte G210-H4G | Manual - Page 78
5-4 Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Administrator Password Entering this password will allow the user to access and change all settings in the - Gigabyte G210-H4G | Manual - Page 79
, it will automatically load the Secure Boot keys form the BIOS databases. When set to Custom, you can customize the Secure Boot settings and manually load its keys from the BIOS database. Options available: Standard/Custom. Default setting is Standard. Image Execution Policy(Note) Press [Enter] for - Gigabyte G210-H4G | Manual - Page 80
5-4-1-1 Image Execution Policy Image Execution policy Internal FV Image Execution Policy per device path on Security Violation. Options available: Always Execute. Default setting is Always Execute. Option ROM Image Execution Policy per device path on Security Violation. Options available: Always - Gigabyte G210-H4G | Manual - Page 81
5-4-1-2 Key Management Key Management This item appears only when the Secure Boot Mode is set to Custom. Factory Default Key Provisioning Force the system to Setup Mode. This will clear all Secure Boot Variables such as Platform Key (PK), Key-exchange Key (KEK), Authorized Signature Database (db), - Gigabyte G210-H4G | Manual - Page 82
Set new KEK Press [Enter] to configure a new KEK. Append Var to KEK Press [Enter] to load additional KEK from a storage devices for an additional db and dbx management. Authorized Signature Database (DB) Display the status of Authorized Signature Database. Delete DB Press [Enter] to delete the db - Gigabyte G210-H4G | Manual - Page 83
5-5 Server Management Menu BMC LAN Configuration BMC LAN Configuration. Press Enter to access the related submenu. View FRU information The FRU information submenu is a simple display page for basic system ID information, as well as system product information. Items on this window are non- - Gigabyte G210-H4G | Manual - Page 84
5-5-1 BMC LAN Configuration Lan Channel 1 Configuration Source Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option will not modify any BMC network parameters during BIOS phase. Options available: Static/Dynamic/Do Nothing. IP Address(Note) Display IP - Gigabyte G210-H4G | Manual - Page 85
5-5-2 View FRU Information The FRU Information menu is a simple display page for basic system ID information, as well as System product information. Items on this window are non-configurable. BIOS Setup - 85 - - Gigabyte G210-H4G | Manual - Page 86
5-5-3 System Event Log Enabling/Disabling Options SEL Components Change this to enable or disable all features of System Event Logging during boot. Options available: Enabled/Disabled. Default setting is Disabled. Erasing Settings Erasing SEL Choose options for erasing Smbios Event Log Erasing is - Gigabyte G210-H4G | Manual - Page 87
5-6 Event Logs Menu Change Smbios Event Log Settings Press [Enter] for configuration of advanced items. View Smbios Event Log Press [Enter] to view event logs. BIOS Setup - 87 - - Gigabyte G210-H4G | Manual - Page 88
5-6-1 Change Smbios Event Log Settings Enabling/Disabling Options Smbios Event Log Choose options to Enable/Disable logging of System boot event. Options available: Enabled/Disabled. Default setting is Enabled. Erasing Settings Erasing Event Log Choose options for erasing Smbios Event Log Erasing - Gigabyte G210-H4G | Manual - Page 89
METW Multiple Event Time Window: The number of minutes which must pass between duplicate log entries which utilize a multiple-event counter. The value ranges from 0 to 99 minutes. Press / keys to increase or decrease the desired values. Custom Options Log OEM Codes Enable/Disable the logging - Gigabyte G210-H4G | Manual - Page 90
5-6-2 View Smbios Event Log The Smbios Event Log is a display page of Smbios Event Log information. Items on this window are nonconfigurable. Press Enter to View Smbios Event Log BIOS Setup - 90 - - Gigabyte G210-H4G | Manual - Page 91
5-7 Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Configuration Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means - Gigabyte G210-H4G | Manual - Page 92
Hard Drive BBS Priorities Press Enter to configure the boot priority. Network Device BBS Priorities Press Enter to configure the boot priority. CSM16 Parameters Press [Enter] for configuration of advanced items. CSM parameters Press [Enter] for configuration of advanced items. BIOS Setup - 92 - - Gigabyte G210-H4G | Manual - Page 93
5-7-1 CSM16 Parameters CSM16 Module Version Display CSM Module version information. Gate20 Active Upon Request: GA20 can be disabled using BIOS services. Always: Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Options available: Upon Request/Always. - Gigabyte G210-H4G | Manual - Page 94
when the Launch CSM is set to Enabled. • If the Launch CSM is set to Disabled, the following five items will not be able to support Legacy mode. Boot option filter Determines which devices system will boot to. Options available: UEFI and Legacy/Legacy only/UEFI only. Default setting is UEFI - Gigabyte G210-H4G | Manual - Page 95
Other PCI device ROM priority For PCI devices other than Network, Mass storage or Video device, defines which OpROM to launch. Options available: UEFI OpROM/Legacy OpROM. Default setting is UEFI OpROM. BIOS Setup - 95 - - Gigabyte G210-H4G | Manual - Page 96
5-8 Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Exit Saves changes made and close the BIOS setup. Options available: Yes/No. Discard Changes and Exit Discards changes made and close the BIOS - Gigabyte G210-H4G | Manual - Page 97
5-9 BIOS Beep Codes # of Beeps 1 2 4 4 5 6 Description Invalid password Recovery started S3 Resume failed DXEIPL was not found No Console Input/Output Devices are found Flash update is failed BIOS Setup - 97 - - Gigabyte G210-H4G | Manual - Page 98
corrupt the boot block can be used to restore the BIOS to a working state. To restore your BIOS, please follow the instructions listed below: Recovery Instruction: 1. Change xxx.CAP to flashabl.CAP. 2. Copy flashabl.CAP to USB diskette. 3. Setting BIOS Recovery jump to enabled status. BIOS Recovery
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
 |
 |
G210-H4G
Four hot-pluggable systems (nodes)
Dual LGA1150 socket motherboard for Intel
®
Xeon
®
series processors
Service Guide
Rev. 1.0