Gigabyte G210-H4G Manual - Page 74
SLP_S4 Assertion Width, Restore, AC Power Loss, 5 Seconds, Power On, Last State
View all Gigabyte G210-H4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
SLP_S4 Assertion Width Select a minimum assertion width of the SLP_S4# signal. Options available: 1-2 Seconds/2-3 Seconds/3-4 Seconds/4-5 Seconds. Default setting is 4-5 Seconds. Restore AC Power Loss This option provides user to set the mode of operation if an AC / power loss occurs. Power On: System power state when AC cord is re-plugged. Power Off: Do not power on system when AC power is back. Last State: Set system to the last sate when AC power is removed. Options available: Power On/Power Off/Last State. Default setting is Last State. BIOS Setup - 74 -
BIOS Setup
- 74 -
SLP_S4 Assertion Width
Select a minimum assertion width of the SLP_S4# signal.
Options available: 1-2 Seconds/2-3 Seconds/3-4 Seconds/4-5 Seconds.
Default setting is
4-5 Seconds
.
Restore
AC Power Loss
This option provides user to set the mode of operation if an AC / power loss occurs.
Power On
:
System power state when AC cord is re-plugged.
Power Off
:
Do not power on system when AC power is back.
Last State
:
Set system to the last sate when AC power is removed.
Options available: Power On/Power Off/Last State. Default setting is
Last State
.