Gigabyte G210-H4G Manual - Page 70
Program PCIe ASPM after OpROM, Gen3 Eq Preset Search
![]() |
View all Gigabyte G210-H4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Detect Non-Compliance Device Detect Non-Compliance PCI Express Device in PEG. Options available: Enabled/Disabled. Default setting is Disabled. Program PCIe ASPM after OpROM Enable/Disable Program PCIe ASPM after OpROM. Options available: Enabled/Disabled. Default setting is Disabled. PEG0 De-emphasis Control PEG0:Configure the De-emphasis control on PEG. Options available: Options available: -6 dB/-3.5 dB. Default setting is -3.5 dB. PEG1 De-emphasis Control PEG1:Configure the De-emphasis control on PEG. Options available: Options available: -6 dB/-3.5 dB. Default setting is -3.5 dB. PEG2 De-emphasis Control PEG2:Configure the De-emphasis control on PEG. Options available: Options available: -6 dB/-3.5 dB. Default setting is -3.5 dB. PEG0 - ASPM Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device. Options available: Enabled/Disabled. Default setting is Disabled. PEG1 - ASPM Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device. Options available: Enabled/Disabled. Default setting is Disabled. PEG2 - ASPM Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device. Options available: Enabled/Disabled. Default setting is Disabled. PEG Sampler Calibrate Enable or disable PEG Sampler Calibrate\nAuto means Disabled for SNB MB/DT, Enabled for IVB A0 B0. Options available: Enabled/Disabled. Default setting is Disabled. Swing Control Perform PEG Swing Control, on IVB C0 and Later. Options available: Reduced/Half/Full. Default setting is Full. PEG Gen3 Equalization Perform PEG Gen3 Equalization steps. Options available: Enabled/Disabled. Default setting is Enabled. Gen3 Eq Preset Search Perform PEG Gen3 Preset Search algorithm, on IVB C0 and Later. Options available: Enabled/Disabled. Default setting is Enabled. PEG RxCEM LoopBack Mode Options available: Enabled/Disabled. Default setting is Disabled. BIOS Setup - 70 -
![](/manual_guide/products/gigabyte-g210h4g-manual-596bfa4/70.png)