Gigabyte GA-2CEWH User Manual - Page 62
Set Supervisor Password, Set User Password, Password on boot, Start From Floppy, Start
View all Gigabyte GA-2CEWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
GA-2CEWH Motherboard Set Supervisor Password You can install and change this options for the setup menus. Type the password up to 6 characters in lengh and press . The password typed now will clear any previously entered password from the CMOS memory. You will be asked to confirm the entered password. Type the password again and press . You may also press to abort the selection and not enter a specified password or press key to disable this option. Set User Password You can only enter but do not have the right to change the options of the setup menus. When you select this function, the following message will appear at the center of the screen to assist you in creating a password. Type the password up to 6 characters in lengh and press . The password typed now will clear any previously entered password from the CMOS memory. You will be asked to confirm the entered password. Type the password again and press . You may also press to abort the selection and not enter a specified password. Password on boot Password entering will be required when system on boot. Enabled Requries entering password when system on boot. Disabled Disable this function. (Default value) Start From Floppy Enabled Enable Start from floppy. (Default value) Disabled Disable this device. Start From IDE HDD Enabled Enable Start from IDE HDD. (Default value) Disabled Disable this device. 62