Gigabyte GA-6PXSVL Manual - Page 51
Straggered Spin Up for Serial SATA Port 0/1/2/3/4/5
View all Gigabyte GA-6PXSVL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
SATA Configuration SATA Port 0/1/2/3/4/5 Displays the installed HDD devices information. System will automatically detect HDD type. SATA Mode Selection Select the on chip SATA type. RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will be allows access the RAID setup utility at boot time. AHCI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID function is disabled and cannot be access the RAID setup utility at boot time. Options available: RAID/AHCI/Disabled. Default setting is AHCI Mode. Aggressive Link Power Management Enable PCH to aggressively enter link power state. Options available: Enabled/Disabled. Default setting is Enabled. Hot Plug (for Serial SATA Port 0/1/2/3/4/5) Enable/Disable Hot Plug support for Serial ATA Port 0/1/2/3/4/5. Options available: Enabled/Disabled. Default setting is Disabled. External SATA (for Serial SATA Port 0/1/2/3/4/5) Enable/Disable External SATA support for Serial ATA Port 0/1/2/3/4/5. Options available: Enabled/Disabled. Default setting is Disabled. Options available: Hard Disk Drive/Solid State Drive. Default setting is Disabled. Straggered Spin Up (for Serial SATA Port 0/1/2/3/4/5) On an edge detect from 0 to 1, the PCH starts a COMreset initialization to the device. Options available: Enabled/Disabled. Default setting is Disabled. 1. With configuration for SATA port 6~13, press press + to enter the setup menu. 2. The following screens appear, and you can start up the configuration for SATA port 6~13. - 51 - BIOS Setup