Gigabyte GA-VM900MC Manual - Page 66
Create RAID Volume, Create Array, Array Mode, for performance, RAID 1 for data protection, RAID SPAN
View all Gigabyte GA-VM900MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
English Create RAID Volume In Main Menu, select Create Array and press , a screen similar to Figure 4 below will appear. VIA VT8237S V-RAID Utility V1.20 X Auto Setup For Data Security X Array Mode RAID 1 (Mirroring) X Select Disk Drives X Start Create Process Dev. Posi. Channel0 Master Channel1 Master Drive Name ST3120026AS ST3120026AS Create a RAID array with the hard disks attached to VIA RAID controller F1 : K, L : Enter : ESC : View Array/disk Status Move to next item Confirm the selection Exit Array Name Mode SATA SATA Size(GB) Status 111.79 Hdd 111.79 Hdd Figure 4 The first step to create a RAID array is to set the RAID mode. Select Array Mode and press . And the RAID mode selection menu will appear (Figure 5). The supported RAID modes include RAID 0 for performance, RAID 1 for data protection, and RAID SPAN for capacity. Use the up or down arrow key to select a RAID mode, then press . The following procedure uses RAID 0 creation as as example. VIA VT8237S V-RAID Utility V1.20 X X X X AASSeturRRRalrterAAAoactytIIISCDDDDMerti10SuesokaPpdfftAooeDeFrrNRroPdpirAvrfaeoeDoIrtrsaDcfaoectprs0aarsmp(oSSaateectncrcicutitepyrioiitnnyg) Dev. Posi. Channel0 Master Channel1 Master Drive Name ST3120026AS ST3120026AS Create a RAID array with the hard disks attached to VIA RAID controller F1 : K, L : Enter : ESC : View Array/disk Status Move to next item Confirm the selection Exit Array Name Mode SATA SATA Size(GB) Status 111.79 Hdd 111.79 Hdd Figure 5 GA-VM900MC Motherboard - 66 -