Gigabyte GA-Z77X-UP7 Manual - Page 11

Support for RAID 0, RAID 1, and RAID 10, x CPU BCLK Down button - drivers

Get Gigabyte GA-Z77X-UP7 PDF manuals and user guides View all Gigabyte GA-Z77X-UP7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Storage Interface ŠŠ ŠŠ USB ŠŠ ŠŠ ŠŠ Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Chipset: - 2 x SATA 6Gb/s connectors (SATA3 0~1) supporting up to 2 SATA 6Gb/s devices - 4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s devices - 1 x mSATA connector * The SATA2 5 connector will become unavailable when the mSATA connector is installed with a solid state drive. - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. 2 x Marvell 88SE9172 chips: - 4 x SATA 6Gb/s connectors (GSATA3 6~9) supporting up to 4 SATA 6Gb/s devices - Support for RAID 0 and RAID 1 Chipset: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) - Up to 4 USB 2.0/1.1 ports (available through the internal USB headers) VIA VL800 chip: - Up to 4 USB 3.0/2.0 ports on the back panel * Due to a Windows 7 limitation, please connect your USB device(s) to the Intel controlled USB port(s) (located below the PS/2 keyboard/mouse port) before the VIA USB 3.0 controller driver is installed. Etron EJ168 chip: - Up to 2 USB 3.0/2.0 ports (available through the internal USB header) 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connectors 1 x PCIe power connector 6 x SATA 6Gb/s connectors 4 x SATA 3Gb/s connectors 1 x mSATA connector 1 x CPU fan header 6 x system fan headers 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x S/PDIF In header 2 x USB 3.0/2.0 headers 2 x USB 2.0/1.1 headers 1 x serial port header 1 x Clear CMOS jumper 1 x power button 1 x reset button 1 x Clear CMOS button 1 x Gear button 1 x CPU BCLK Down button 1 x CPU BCLK Up button 1 x CPU Ratio Down button 1 x CPU Ratio Up button 1 x onboard voltage measurement module - 11 - Hardware Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
- 11 -
Hardware Installation
Storage Interface
³
Chipset:
-
2 x SATA 6Gb/s connectors (SATA3 0~1) supporting up to 2 SATA 6Gb/s
devices
-
4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s
devices
-
1 x mSATA connector
*
The SATA2 5 connector will become unavailable when the mSATA connector is
installed with a solid state drive.
-
Support for RAID 0, RAID 1, RAID 5, and RAID 10
*
When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the
system performance of the RAID set may vary depending on the devices being
connected.
³
2 x Marvell 88SE9172 chips:
-
4 x SATA 6Gb/s connectors (GSATA3 6~9) supporting up to 4 SATA 6Gb/s
devices
-
Support for RAID 0 and RAID 1
USB
³
Chipset:
-
Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
-
Up to 4 USB 2.0/1.1 ports (available through the internal USB headers)
³
VIA VL800 chip:
-
Up to 4 USB 3.0/2.0 ports on the back panel
*
Due to a Windows 7 limitation, please connect your USB device(s) to the Intel
controlled USB port(s) (located below the PS/2 keyboard/mouse port) before the
VIA USB 3.0 controller driver is installed.
³
Etron EJ168 chip:
-
Up to 2 USB 3.0/2.0 ports (available through the internal USB header)
Internal
Connectors
³
1 x 24-pin ATX main power connector
³
2 x 8-pin ATX 12V power connectors
³
1 x PCIe power connector
³
6 x SATA 6Gb/s connectors
³
4 x SATA 3Gb/s connectors
³
1 x mSATA connector
³
1 x CPU fan header
³
6 x system fan headers
³
1 x front panel header
³
1 x front panel audio header
³
1 x S/PDIF Out header
³
1 x S/PDIF In header
³
2 x USB 3.0/2.0 headers
³
2 x USB 2.0/1.1 headers
³
1 x serial port header
³
1 x Clear CMOS jumper
³
1 x power button
³
1 x reset button
³
1 x Clear CMOS button
³
1 x Gear button
³
1 x CPU BCLK Down button
³
1 x CPU BCLK Up button
³
1 x CPU Ratio Down button
³
1 x CPU Ratio Up button
³
1 x onboard voltage measurement module