Gigabyte GA-Z77X-UP7 Manual - Page 20
Installing the eSATA Bracket, Connect the SATA
View all Gigabyte GA-Z77X-UP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1-7 Installing the eSATA Bracket The eSATA bracket allows you to connect external SATA device(s) to your system by expanding the internal SATA port(s) to the chassis back panel. •• Turn off your system and the power switch on the power supply before installing or removing the eSATA bracket and SATA power cable to prevent damage to hardware. •• Insert the SATA signal cable and SATA power cable securely into the corresponding connectors when installing. eSATA Bracket SATA Signal Cable SATA Power Cable External SATA Connector Power Connector External SATA Connector The eSATA bracket includes one eSATA bracket, two SATA signal cables, and one SATA power cable. Follow the steps below to install the eSATA bracket: Step 1: Locate one free slot and secure the eSATA bracket to the chassis back panel with a screw. Step 2: Connect the SATA cable from the bracket to the SATA port on your motherboard. Step 3: Step 4: Connect the power Plug one end of the cable from the bracket SATA signal cable to the power supply. into the external SATA connector on the bracket. Then attach the SATA power cable to the power connector Step 5: on the bracket. Connect the other ends of the SATA signal cable and SATA power cable to your SATA device. For SATA device in external enclosure, you only need to connect the SATA signal cable. Before connecting the SATA signal cable, make sure to turn off the power of the external enclosure. Hardware Installation - 20 -