Gigabyte GA-Z77X-UP7 Manual - Page 59
OnBoard USB3.0 Controller#1 VIA VL800 USB Controller, USB 3.0/2.0 ports on
View all Gigabyte GA-Z77X-UP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
&& Internal Graphics Enables or disables the onboard graphics function. (Default: Auto) && Internal Graphics Memory Size Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M) && DVMT Total Memory Size Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX. (Default: MAX) && Init Display First Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGFX Sets the onboard graphics as the first display. PCIe 1 Slot Sets the graphics card on the PCIEX16_1 slot as the first display. (Default) PCIe 2 Slot Sets the graphics card on the PCIEX8_1 slot as the first display. PCIe 3 Slot Sets the graphics card on the PCIEX16_3 slot as the first display. PCIe 4 Slot Sets the graphics card on the PCIEX8_2 slot as the first display. && Intel(R) Rapid Start Technology Enables or disables Intel Rapid Start Technology. This item is configurable only when an SSD is installed. (Default: Disabled) && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) && EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) && USB Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. `` Trusted Computing && TPM SUPPORT Enables or disables Trusted Platform Module (TPM). Set this item to Enable when a TPM device is installed. (Default: Disable) && OnBoard USB3.0 Controller#1 (VIA VL800 USB Controller, USB 3.0/2.0 ports on the back panel) Enables or disables the VIA VL800 USB controller. (Default: Enabled) - 59 - BIOS Setup