Gigabyte MSH61DK Manual - Page 47
USB Configuration
View all Gigabyte MSH61DK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2-2-7 USB Configuration Detected USB Devices Displays the information of installed USB devices in the system. Legacy USB Support Enables or disables support for legacy USB devices. Options available: Auto/Enabled/Disabled. Default setting is Enabled. USB 3.0 Suupport When enabled, the USB 3.0 controller will function normally. Options available: Enabled/Disabled. Default setting is Enabled. XHCI Hand-off Enable/Disable XHCI Hand-off function. Options available: Enabled/Disabled. Default setting is Enabled. EHCI Hand-off Enable/Disable EHCI Hand-off function. Options available: Enabled/Disabled. Default setting is Enabled. USB transfer time-out Define USB transfer start unit command timeout. Options available: 10 sec/20sec/30sec/40sec. Device reset time-out Define USB device reset start unit command timeout. Options available: 10 sec/20sec/30sec/40sec. Device power-up delay Define USB device powering up start unit command timeout. When this item is set to Manual, you can press numeric keys to configure desired values. Options available: Auto/Manual. - 41 - BIOS Setup