Gigabyte X299X AORUS XTREME WATER User Manual - Page 57
USB Configuration, SATA And RST Configuration, Configured as eSATA, USB Mass Storage Driver Support
View all Gigabyte X299X AORUS XTREME WATER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
USB Configuration && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) && USB Mass Storage Driver Support Enables or disables support for USB storage devices. (Default: Enabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) && USB transfer time-out Allows you to set the USB transfer time-out value. && Device reset time-out Allows you to set the USB mass storage device Start Unit command time-out. && Device power-up delay Allows you to set the time the device will take before it properly reports itself to the host controller. && Mass Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. SATA And RST Configuration && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Intel RST Premium Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Disabled) && Port 0/1/2/3/4/5/6/7 Enables or disables each SATA port. (Default: Enabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && Configured as eSATA Enables or disables support for external SATA devices. - 57 - BIOS Setup