Gigabyte Z790 AORUS XTREME User Manual - Page 25
NOISE_SENSOR Noise Detection Header, SATA3 4/5/6/7 SATA 6Gb/s Connectors, RAID 1, RAID5
View all Gigabyte Z790 AORUS XTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
10) SATA3 4/5/6/7 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support RAID 0, RAID 1, RAID5, and RAID 10. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's website for instructions on configuring a RAID array. G.QBOFM G.QBOFM Pin No. Definition 7 1 1 GND 2 TXP 7 1 3 TXN SATA3 5 7 46 4 GND 5 RXN 6 RXP 7 GND To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's website and search for "SATA Configuration" for more information. G 11) NOISE_SENSOR (Noise Detection Header) This header can be used to connect a noise detection cable to detect the noise inside the case. Pin No. Definition 1 1 Noise Detection 2 GND Noise Detection Cable 1 For more information on the noise detection function, please navigate to the "Unique Features" page of GIGABYTE's website and search for "FAN Control." Before connecting the cable to the header, make sure to remove the jumper cap; re-place the jumper cap if the header is not in use. - 25 -