HTC touchpro2 Quick Start Guide - Page 9

Storage card, To charge the battery, To install the microSD card

Page 9 highlights

Quick Start Guide  To charge the battery 1. Connect the USB connector of the AC adapter to the sync connector at the bottom of your device. 2. Plug in the AC adapter to an electrical outlet to start charging the battery. The battery will be fully charged after about 3 hours of charging. Note Only the AC adapter and USB sync cable provided with your device must be used to charge the battery. Storage card To install the microSD card 1. Remove the stylus and then remove the back cover. 2. Locate the microSD card slot on the upper part of the exposed right panel. 3. Insert the microSD card into the slot with its gold contacts facing down until it clicks into place. Note To remove the microSD card, press to eject it from the slot. Storage card slot

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

Quick Start Guide
9
To charge the battery
Connect the USB connector of the AC adapter to the sync connector at the
bottom of your device.
Plug in the AC adapter to an electrical outlet to start charging the battery.
The battery will be fully charged after about
3 hours
of charging.
Note
Only the AC adapter and USB sync cable provided with your device must be used
to charge the battery.
Storage card
To install the microSD card
Remove the stylus and then
remove the back cover.
Locate the microSD card slot on
the upper part of the exposed right
panel.
Insert the microSD card into the
slot with its gold contacts facing
down until it clicks into place.
Note
To remove the microSD card, press to
eject it from the slot.
1.
2.
3.
Storage
card slot
1.
2.