Haier HDE5300AW User Manual - Page 14

Procedure For Reversing The Door

Get Haier HDE5300AW PDF manuals and user guides View all Haier HDE5300AW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

English PROCEDURE FOR REVERSING THE DOOR The door on your dryer can be changed from a right-side opening to a leftside opening, if you need. Tools required: 1. Long magnetic head phillip screw driver 2. Power Drill Before you reverse the door, place a soft cloth on the work space to protect the surface of the door. 1. Open the dryer door. Fig 1 2. Using the long phillip screw driver, remove the left one screw from the hinge that attach the dryer door to the front panel of the dryer. (Fig 1) 3. Using the long phillip screw driver, remove the right 2 screws from the hinge that attach the dryer door to the front panel of the dryer. (Fig 2) Note: While removing the door screws, the screwdriver must be straight. Screws may not come off if screw driver is at an angle. Fig 2 4. To disengage the door from the panel, hold the door close to the hinge and lift straight up. (There are 3 tabs in the back of the hinge that will be disengaged). (Fig 3) Fig 3 NOTE: Be careful while removing the door. Lift with caution or door hinge tab may break. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
English
Before you reverse the door, place a soft cloth
on the work space to protect the surface of the
door.
1. Open the dryer door.
2. Using the long phillip screw driver,
remove the left one screw from the hinge
that attach the dryer door to the front
panel of the dryer. (Fig 1)
3. Using the long phillip screw driver,
remove the right 2 screws from the hinge
that attach the dryer door to the
front panel of the dryer. (Fig 2)
Note: While removing the door screws,
the screwdriver must be straight. Screws
may not come off if screw driver is at an
angle.
4. To disengage the door from the panel,
hold the door close to the hinge and lift
straight up. (There are 3 tabs in the back
of the hinge that will be disengaged).
(Fig 3)
The door on your dryer can be changed from a right-side opening to a left-
side opening, if you need.
Tools required: 1. Long magnetic head
phillip screw driver
2. Power Drill
13
Fig 1
Fig 2
Fig 3
NOTE:
Be careful while removing the door. Lift
with caution or door hinge tab may break.
PROCEDURE FOR REVERSING THE DOOR