Haier HDE5300AW User Manual - Page 33
Auto Dry Cycle
![]() |
View all Haier HDE5300AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English AUTO DRY CYCLE HDE/HDG5300AW 1. Touch the Power On/Off button • The computer board will beep once and the dryer will change from off status to the initial operating status (NORMAL program). • If the "Start/Pause" button is not touched in 5 min after powering on, it automatically cuts off power and returns to off status. • The dryer returns to off status immediately upon end of each cycle. Regardless, the status of the control panel, touching OFF will stop all operations. • The default status is "NORMAL" program. 2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle. • The NORMAL program will be automatically selected after powering on. If another full automatic program is desired, touch "Auto-Dry Cycles" button until corresponding indicator turns on. • To select your desired settings, the "Custom Program" function should be chosen. The dryer can memorize programs defined by user and display the previous program upon next application of this function. • After powering on, select "Auto-Dry Cycles". 3. Touch "Dry Level" button to select a suitable drying level. • After powering on, the clothes dryer automatically sets dryness at "NORMAL", which means a longer drying time. If other drying level is desired, press "Dry Level" button to select. 4 Touch "Signal" button, and the buzzer will sound upon end of a cycle. • After switching on, the dryer automatically sets buzzer at "Softer". The user may define three prompt sound conditions: "Loud", "Soft" and "Off". 5. Touch the "Wrinkle Saver" button to select a suitable reserved drying program. 32
![](/manual_guide/products/haier-hde5000aw-user-manual-6b99158/33.png)