Haier HLP21N User Manual - Page 12

Step 3 - Install Bottom Plate - does not drain

Get Haier HLP21N PDF manuals and user guides
UPC - 688057395517
View all Haier HLP21N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

3. Inspect and remove any remains of packing, tape or printed materials before using the washer. WARNING Suffocation Hazard To avoid danger of suffocation, keep plastic bag and other packing material away from babies and children. Do not use this bag in cribs, carriages and playpens. The plastic bag could block nose and mouth and prevent breathing. This bag is not a toy. 4. Place a piece of cardboard or other protective material on the floor. Lay the washer on its back on top of the cardboard or protective material. STEP 2 - ROUTE DRAIN HOSE (OPTIONAL) The washer comes from the factory with the drain hose routed so that it extends from the bottom, left-hand side of the washer. If you want the hose to extend from the right-hand side of the washer for draining, you must reroute the hose. 1. Remove the hose clamp. Gently pull the drain hose back through the opening on the left-hand side of the washer. 2. Insert the drain hose into the opening on the right-hand side of the washer and gently extend the hose to its full length. Front Front STEP 3 - INSTALL BOTTOM PLATE 1. Place the bottom plate against the bottom of the washer, with the side marked "face to floor" facing you, and the end marked "front" aligned with the front of the washer. 2. Align the holes in the bottom plate with the holes in the bottom of the washer. IMPORTANT: To avoid damage to the washer, make sure the bottom plate is positioned correctly before fastening the plate to the washer. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
10
3.
Inspect and remove any remains of packing, tape or printed materials before
using the washer.
WARNING
Suffocation Hazard
To avoid danger of suffocation, keep plastic bag and other packing
material away from babies and children. Do not use this bag in cribs,
carriages and playpens. The plastic bag could block nose and mouth
and prevent breathing. This bag is not a toy.
4.
Place a piece of cardboard or other protective material on the floor. Lay the
washer on its back on top of the cardboard or protective material.
STEP 2 - ROUTE DRAIN HOSE (OPTIONAL)
The washer comes from the factory with the drain hose routed so that it extends
from the bottom, left-hand side of the washer. If you want the hose to extend from
the right-hand side of the washer for draining, you must reroute the hose.
1.
Remove the hose clamp. Gently pull the drain hose back through the opening on
the left-hand side of the washer.
2.
Insert the drain hose into the opening on the right-hand side of the washer and
gently extend the hose to its full length.
Front
Front
STEP 3 - INSTALL BOTTOM PLATE
1.
Place the bottom plate against the bottom of the washer, with the side marked
“face to floor” facing you, and the end marked “front” aligned with the front of
the washer.
2.
Align the holes in the bottom plate with the holes in the bottom of the washer.
IMPORTANT:
To avoid damage to the washer, make sure the bottom plate is
positioned correctly before fastening the plate to the washer.