Haier HLP21N User Manual - Page 14
Step 5 - Level The Washer
UPC - 688057395517
View all Haier HLP21N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
STEP 5 - LEVEL THE WASHER IMPORTANT: Proper leveling of the washer will help reduce noise and vibration. 1. Stand the washer upright. NOTE: If you installed casters, unlock them by lifting up on the tab. 2. Place washer in its final location. Check that the water and drain lines are not strained or pinched. Make sure that all four feet are firmly in contact with the floor and that the washer rests solidly in position. 3. Using a carpenter's level, check to make sure the washer is level from side to side and from front to back. 4. If the washer is not level, adjust the leveling feet or casters. Turn clockwise to extend (raise the washer) or counterclockwise to retract (lower the washer). NOTE: If the washer is inclined more than 2°, it will not operate. FIXED LEVELING FEET 1. Loosen the adjustable large, outer ring, and then turn the center foot clockwise or counterclockwise to adjust the height. Raise Lower Outer Ring Center Foot 2. Once the washer is level, lock the position of each leveling foot by tightening the large, outer ring. 12