Haier HLP21N User Manual - Page 18

Step 8 - Complete Installation - hose

Page 18 highlights

7. Using 2 cable ties, fasten the water inlet hose to the drain hose so that the hoses will stay in place. Water Inlet Hose Cable Ties Drain Hose IMPORTANT: Place the extra hose length (slack) inside the sink to avoid strain and possible damage to the water faucet. Water Inlet Hose STEP 8 - COMPLETE INSTALLATION 1. Plug the washer into a grounded 3 prong outlet. 2. Check that water faucet is turned on. 3. D ispose of/recycle all packaging materials. 4. Run a normal wash cycle using detergent to test and clean the washer. See the "Operating Instructions" section. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

16
7.
Using 2 cable ties, fasten the water inlet hose to the drain hose so that the hoses
will stay in place.
Water Inlet
Hose
Cable Ties
Drain Hose
IMPORTANT:
Place the extra hose length (slack) inside the sink to avoid strain
and possible damage to the water faucet.
Water Inlet
Hose
STEP 8 - COMPLETE INSTALLATION
1.
Plug the washer into a grounded 3 prong outlet.
2.
Check that water faucet is turned on.
3.
Dispose of/recycle all packaging materials.
4.
Run a normal wash cycle using detergent to test and
clean the washer. See the ā€¯Operating Instructionsā€¯
section.