Haier HLP21N User Manual - Page 15
Step 6 - Secure The Drain Hose, Step 7 - Connect The Water Hose - details
UPC - 688057395517
View all Haier HLP21N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CASTERS Using the caster wrench turn the locking nut on the caster clockwise or counterclockwise to adjust the height. Raise Lower Locking Nut STEP 6 - SECURE THE DRAIN HOSE 1. Put the drain hose hook end in a drain pipe or laundry tub. 2. Secure the drain hose in place by fastening it to a water hose, the standpipe, or a leg on the laundry tub. See "Drain System Requirements" for details. STEP 7 - CONNECT THE WATER HOSE IMPORTANT: Only use a new hose when installing the washer. NOTE: Periodically inspect hose for cracks, cuts, leaks or wear. Replace with new hose every 5 years. 1. Check that a flat washer is present and firmly in place in each end of the water inlet hose. Flat washers are pre-installed at the factory. A Washer 13
13
CASTERS
Using the caster wrench turn the locking nut on the caster clockwise or
counterclockwise to adjust the height.
Raise
Lower
Locking Nut
STEP 6 - SECURE THE DRAIN HOSE
1.
Put the drain hose hook end in a drain pipe or laundry tub.
2.
Secure the drain hose in place by fastening it to a water hose, the standpipe, or a
leg on the laundry tub. See “Drain System Requirements” for details.
STEP 7 - CONNECT THE WATER HOSE
IMPORTANT:
Only use a new hose when installing the washer.
NOTE:
Periodically inspect hose for cracks, cuts, leaks or wear. Replace with new
hose every 5 years.
1.
Check that a flat washer is present and firmly in place in each end of the water
inlet hose. Flat washers are pre-installed at the factory.
A
Washer