Haier HLP21N User Manual - Page 17

OPTION 2 - PORTABLE NOTE: In order for this washer to meet the regulated energy standards, the faucet supplying the water must be set to cold. 1. Remove the aerator from your faucet nozzle. 2. Examine the faucet to determine if it has internal or external faucet threads. • Internal threads - Keep the rubber washer in place • External threads - Remove the rubber washer before threading the faucet connector onto the faucet. Removable Washer Secondary Washer (Do not remove) Washer Support (Do not remove) Silver Faucet Connector NOTE: The faucet connector (provided) is threaded so that it will fit MOST faucets. If the provided faucet connector does not fit your faucet, you will need to purchase a faucet connector in the correct size. 3. Thread the silver faucet connector onto the faucet. Internal Threads External Threads Rubber Washer Silver Faucet Connector Quick-sink Faucet Adaptor Water Inlet Hose 4. Attach the quick-sink faucet adaptor to the grey end of the inlet hose making sure the pre‑installed flat washer is between the hose and the adaptor. 5. Attach the quick-sink faucet adaptor to the silver faucet connector by pulling down on the white collar while pushing upwards on the faucet. Release the white collar and it will lock into place. 6. Turn on the water faucet and check for leaks. If there is any leaking, check for loose connections and tighten. 15