Harman Kardon CR151 Owners Manual - Page 10
Harman Kardon CR151 Manual
View all Harman Kardon CR151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
O +12V SWITCHED (+ACC) wire The +12V SWITCHED wire (red) is a positive power input. It should be connected to a circuit which is turned on when the IGNITION SWITCH is in the "ACC" position. GROUND wire This is the negative power input wire (black). It should be connected securely to the car chassis. Speaker System wires Connect the speaker systems to these wires. Be careful to connect the positive speaker to the positive wires of the receiver/deck. Do not connect the negative speaker wires to the car chassis. NOTE: •Some cars are provided with speaker wires which often include a negative wire common to both left and right channels. This wire should not be used with the receiver/deck. Be sure to connect the negative speaker wires from left and right channels to their respective wires on the receiver/deck. •If other cables are used instead of these speaker leads, insulate the speaker leads to prevent short circuiting. EXT. INPUT jacks (CR151 ONLY) These input jacks are for connection to the output jacks of a CD player, or graphic equalizer or surround processor. It is recommended that high quality shielded coaxial cables with tight-fitting RCA plugs be used for this connection. EXT. OUTPUT jacks (CR151 ONLY) These output jacks are for connection to the input jacks on a graphic equalizer or surround processor. 9