Harman Kardon CR151 Owners Manual - Page 16

51 rx. Eject the cassette tape by pressing the A button whenever you listen to the radio. is 1. Turn the tuner on by pushing the ON VOL. knob. 2. Select AM or FM reception by pressing the FM/AM button. The selected AM or FM reception will be displayed. 3. Press the SEEK button and the button illuminates. To search for a broadcast signal with a higher frequency, press the /N button. To search for a broadcast signal with a lower frequency, press the \/ button. When a broadcast signal is tuned in, the automatic seek stops. If the tuned frequency is not the desired broadcast station, press the ^ or \/ button to resume automatic seeking. To stop seeking, press the SEEK button and the button light is turned off. 4. The GD indicator will illuminate only when an FM stereo broadcast is being received. 5. Adjust the VOLUME, BASS, TREBLE, BALANCE and FADER controls to suit your favorite volume and sound quality. • Press the MONO button when the FM station is too noisy. The stereo broadcasting will be switched to monaural but it is more comfortable to listen to. • Press the LOCAL button to avoid the seek mode stopping at weak signals. i. You can manually select a broadcasting station if a broadcast signal is not strong enough to find by seek tuning or you know the station's frequency. 1. Turn the tuner on by pushing the ON VOL. knob. The frequency received will be displayed. 2. Select AM or FM reception by pressing the FM/AM button. The selected reception will be displayed. 3. Select the desired station by pressing the"or \/ button while checking the frequency on the LCD display. 4. Adjust the VOLUME, BASS, TREBLE, BALANCE and FADER controls to suit your favorite volume and sound quality. 15