Harman Kardon DVD 48 Owners Manual - Page 11

FRONT-PANEL INFORMATION DISPLAY Audio Bitstream Playback Control Random Repeat Program Parental Camera A-B Lock Angle Repeat Video Off HDMI Video Resolution Disc-Type Group/Title Playback Chapter/Track Time Mode NOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com. Disc-Type Indicators: The SACD, DVD, DVD-Audio, CD, VCD, MP3, WMA or JPEG indicator will light to show the type of disc currently being played. Audio Bitstream Indicators: When a Dolby Digital, DTS or Linear PCM digital audio signal is detected, one of these indicators will light. DVD-Audio, MP3 and WMA bitstreams will be indicated by the DiscType Indicator. Parental-Lock Indicator: This indicator lights in red when the parental-lock system is engaged to prevent changing the rating level without a code. Program Indicator: This indicator lights when a playlist has been programmed using the menu system (available for CDs only). Angle Indicator: This indicator blinks when alternative viewing angles are available on the DVD currently playing. Random Indicator: This indicator lights when the unit is in the Random Play mode. A-B Repeat Indicator: This indicator lights when a specific passage for repeat playback has been selected. VCD Playback Control Indicator: This indicator lights when the playback control function is turned on for VCDs. Repeat Indicators: These indicators light when any of the Repeat functions are in use. Video OFF Indicator: This indicator lights in red when the unit's video output has been turned off by pressing the Video OFF Button on the remote control. HDMI Indicator: This indicator lights when the HDMI Output is enabled. Press the HDMI Button on the remote to toggle between turning the HDMI Output on and off. When the HDMI Output is on (and this indicator is lit), the Component Video Outputs are deactivated, and vice versa. Video Resolution Indicators: One of these indicators will light to indicate the current video resolution of the HDMI Output, based on what your video display is capable of handling. The HDMI Output will upscale source materials to the higher resolution, as indicated in the HDMI SETUP menu (explained in the Initial Setup section). You may change the HDMI Video setting to a lower resolution to improve picture quality using the VIDEO SETUP menu. As you select a specific HDMI Output video resolution and the DVD 48 successfully determines that the video display is capable of handling that resolution, its indicator will light and will appear briefly in the Message Display. Time Indicators: These positions show the running time of a disc in play. NOTE: These positions will also display text messages about the DVD's status, including Loading when a disc is loading, Power Off when the unit is turned off, and Unknown Disc when a disc not compatible with the DVD 48 is loaded. Chapter/Track Number Indicators: When a DVD disc is playing, these two positions show the current chapter. When a DVD-Audio, SACD or CD disc is playing, they will show the current track number. Group/Title Indicators: These two positions show the current title number when a DVD disc is playing, or the current group for a DVDAudio disc. Playback-Mode Indicators: These indicators light to show the current playback mode: › Lights when a disc is playing in the Normal mode. This indicator will flash when the disc is in Forward Slow Play mode. The on-screen banner display indicates the selected speed (1/2x, 1/4x, 1/8x or 1/16x). ›› When the DVD 48 is in the Fast Search Play mode, two of these indicators will light to show that the unit is in a Fast Play mode. The selection will be displayed on screen as one of six steps that correspond to the following speeds: ~1-1/2x, 4x, 6x, 8x, 16x or 32x. Fast Play mode is not available for WMA files. ± Lights when the disc is paused. ‹‹ Lights when the disc is in the Fast Search Reverse mode. The selection will be displayed on screen as one of six steps that correspond to the following speeds: ~1-1/2x, 4x, 6x, 8x, 16x or 32x. Fast Search Reverse mode is not available for WMA files. ‹ Flashes when the disc is in Reverse Slow Play mode. The on-screen banner display indicates the selected speed (1/2x, 1/4x or 1/8x). 11