Hayward Aqua Connect® Aqua Connect® Installation Manual - Page 7
Enter CMD and click OK ACHN's URL.
 |
View all Hayward Aqua Connect® manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2) Enter "CMD" and click "OK" (Figure 5). Figure 5 3) At the command prompt, type "ping mypoolnnn" where nnn is the last 3 digits in the ACHN's MAC address (see "ACHN's URL" on page 3) and press the ENTER key on your keyboard (Figure 6). Figure 6 4) After pressing ENTER, the system will reveal the IP address associated with the ACHN's URL. This IP address should be found on the line directly below your request (highlighted in white in Figure 7). Figure 7 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
 |
 |
5
2)
Enter "CMD" and click "OK" (Figure 5).
3)
At the command prompt, type "
ping mypool
nnn
"
where
nnn
is the last 3 digits in
the ACHN's MAC address (see "ACHN's URL" on page 3) and press the ENTER
key on your keyboard (Figure 6).
4)
After pressing ENTER, the system will reveal the IP address associated with the
ACHN's URL.
This IP address should be found on the line directly below your
request (highlighted in white in Figure 7).
Figure 5
Figure 6
Figure 7