HealthRider Exerplay 300 Bike English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480. Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack- ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tools, assembly requires a Phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. M8 Locknut (61)-4 M10 Locknut (87)-2 M6 Washer (44)-4 M8 Split Washer (55)-10 M4 x 16mm Flange Screw (80)-4 M6 x 18mm Patch Screw (77)-2 M6 x 38mm Patch Screw (81)-4 M6 x 42mm Patch Screw (51)-2 M8 x 38mm Button Bolt (72)-4 M8 x 50mm Patch Screw (52)-4 M8 x 16mm Patch Screw (54)-6 M10 x 32mm Button Bolt (78)-2 M10 x 63mm Bolt Set (62)-1 5