HealthRider Exerplay 300 Bike English Manual - Page 8

5. The Console (4) can use four 1.5V "D" batteries (not included); alkaline batteries are recom- 5 mended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries. Otherwise, you may damage the console displays or other electronic components. Remove the screw, remove the battery cover, insert the batteries into the bat- tery compartments, and reattach the battery cover. Make sure to orient the batteries as shown by the diagrams inside the battery compartments. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Battery Cover Batteries Screw 4 Batteries 6. While another person holds the Console (4) near the Upright (2), connect the console wire 6 harnesses to the Game/Pulse and Main Wire Harnesses (42, 43); make sure to connect the console wire that has a tag to the game wire 4 that has a tag. Insert the excess wire down- ward into the Upright. 43 2 80 Tip: Do not pinch the Wire Harnesses (42, 43). Attach the Console (4) to the Upright (2) with four M4 x 16mm Flange Screws (80). 42 80 Console Wire Harnesses Do not pinch the Wire Harnesses (42, 43) during this step 8