HealthRider H30x Bike English Manual - Page 7
Tip: Avoid pinching the Extension Wire 59., Avoid pinching the, Extension Wire 59
View all HealthRider H30x Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Orient the Seat (23) and the Seat Carriage (24) as shown. Attach the Seat (23) to the Seat Carriage (24) with four M8 Locknuts (72) and four M8 Split Washers (75). Slide the Seat Carriage (24) onto the Seat Post (6). Then, slide the Seat Carriage all the way forward and tighten the Seat Adjustment Knob (26). Attach an M4 x 5mm Bright Screw (91) to the rear of the Seat Post (6). 4 23 24 75 72 91 6 26 5. Apply some of the included grease to an M6 x 70mm Bolt Set (50). Orient the Handlebar (5) and the Upright (4) as shown. While a second person holds the Handlebar (5) near the Upright (4), insert the Extension Wire (59) upward through the Handlebar. Tip: Avoid pinching the Extension Wire (59). Attach the Handlebar (5) to the Upright (4) with the M6 x 70mm Bolt Set (50) and two M8 Washers (43). Then, attach an M6 x 60mm Bolt Set (51) through the lower bracket on the Handlebar (5). 5 50 43 Grease 51 4 Avoid pinching the Extension Wire (59) 59 5 43 50 51 7