HealthRider H40v Vibration English Manual - Page 4

15. When connecting the power cord (see page 11), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit as the vibration platform. Do not use an extension cord. 16. Use only a single-outlet surge suppressor that meets all of the specifications described on page 11. To purchase a surge suppressor, please see your local electronics store. 17. Keep the power cord away from heated surfaces. 18. Never leave the vibration platform unattended while it is running. Always unplug the power cord and switch the on/off switch to the off position when the vibration platform is not in use. (See the drawing on page 5 for the location of the circuit breaker.) DANGER: 19. Always unplug the power cord when the vibration platform is not in use and before cleaning the vibration plat- form. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 4