HealthRider H40v Vibration English Manual - Page 7
Assembly
View all HealthRider H40v Vibration manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY Make Assembly Easier This manual is designed to ensure that the vibration platform can be assembled successfully by almost anyone. Most people find that if they set aside plenty of time, assembly goes smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • For help identifying small parts, see the PART IDENTIFICATION CHART on page 6. • Tighten all parts as you assemble them. • Assembly may require the following tools (not included): one adjustable wrench one rubber mallet one Phillips screwdriver Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Orient the Lower Upright (B) so that the lower 1 control panel is facing the platform. While a sec- ond person holds the Lower Upright near the Base (A), plug the upright wire into the indicated jack in the Base. B Next, insert the Lower Upright (B) into the Base (A). Platform Lower Control Panel Upright Wire A Jack 7