HealthRider H85t Treadmill English Manual - Page 7

ASSEMBLY •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. •• Left parts are marked “"L”" or “"Left”" and right parts are marked “"R”" or “"Right.”" •• To identify small parts, see page 6. •• Assembly requires the following tools: the included hex keys one adjustable wrench one Phillips screwdriver scissors needlenose pliers one rubber mallet To avoid damaging parts, do not use power tools. 1. Go to www.healthriderservice.com/registra- tion and register your product. 1 Registration provides the following benefits: •• activates your product manufacturer’'s warranty •• saves you time if you ever need to contact Customer Care •• allows us to notify you of upgrades and offers Note: If you do not have Internet access, call CUSTOMER CARE (see the front cover of this manual) to register your product. 2. Make sure that the power cord is unplugged. 2 Remove the 3/8" Locknut (11), the 3/8" x 2" Bolt (3), and the shipping bracket (C) from the Base (60). Then, remove the shipping bracket from the other side of the treadmill. Discard the shipping brackets. Save the Locknuts and the Bolts for steps 3 and 6. C 60 3 11 7