HealthRider H90e Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tools, assembly requires a Phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. M8.5 x 16mm x M6 Split Washer M8 Split 1.5mm Washer M10 x 25mm (102)-8 Washer (101)-4 (103)-6 Washer (87)-2 M10 Curved Link Arm Washer (99)-4 Spacer (74)-4 M4 x 16mm Wave Washer Screw (116)-16 (100)-2 M6 x 35mm Patch Screw (109)-4 M6 x 62mm Patch Screw (108)-4 M8 x 15mm Patch Screw (106)-10 M8 x 20mm Patch Screw (107)-4 M8 x 25mm Patch Screw (110)-2 M10 x 20mm Patch Screw (111)-2 M10 x 93mm Patch Screw (82)-4 5