HealthRider Hotel Fitness It9800 Treadmill English Manual - Page 10

6. Set the console assembly on the Upright (93). Make sure not to pinch any wires. Make sure that the ends of the Console Crossbar (110) are inserted into the ends of the Upright. Start two 3/8" x 2 1/2" Screws (61) with two 3/8" Flat Washers (78) into the Upright (93) as shown. Do not tighten the Screws yet. Next, attach the console assembly to the Upright (93) with two 3/8" x 2 1/2" Screws (61) and two 3/8" Star Washers (66) as shown. Do not tighten the Screws yet. 6 110 78 61 Console Assembly 110 66 93 66 78 61 61 61 7. Start four 5/16" x 1" Screws (51) into the Upright (93) and the Console Crossbar (110); start all four Screws, 7 and then tighten them. Tighten four #8 x 3/4" Screws (86) into the Upright (93) and the console assembly. Tighten the four 3/8" x 2 1/2" Screws (61). Make sure that the four #8 x 1" Screws (91) are tightened. Be careful not to overtighten the Screws. 51 Console Assembly 91 110 103 91 61 93 61 51 86 86 8. Tighten two #8 x 3/4" Screws (86) into the Console Base (109) and the Upright (93). Do not overtighten the Screws. Identify the Left and Right Handrail Assemblies (112, 113). Hold the Right Handrail Assembly (113) near the Upright (93). Insert the wire from the Right Handrail through the hole in the Console Base (109) and out of the top of the Upright. Apply three drops of the included thread adhesive to the threaded ends of two 3/8" x 5 1/2" Screws (50). Then, attach the Right Handrail Assembly (113) to the Upright with the two Screws and two 3/8" Washers (130). Start both Screws, and then tighten them. Note: Torque the Screws to 340 in-lbs. Attach the Left Handrail Assembly (112) as described above. 8 Wire 112 86 50 130 113 86 109 Wire 130 50 93 10