HealthRider Hotel Fitness It9800 Treadmill English Manual - Page 9

3. Partially tighten six 1/2" x 1" Screws (35) with four 1/2" Split Washers (49) and two 1/2" Star Washers (83) 3 through the bracket near the right Upright (93) and into the Base Frame (56) as shown; do not tighten the Screws yet. Make sure not to pinch any wires.  Repeat this step on the left side of the incline trainer. Start all twelve 1/2" x 1" Screws (35), and then tighten them. Remove the pieces of wood (A) from under the Base 35 35 93 Frame (56). 49 83 A 56 49 35 4. Set the console assembly face down on a soft surface to avoid scratching the console. 4 B Remove and discard the four indicated screws (B) from the console assembly. Remove the Console Back Cover (104). Console Assembly 104 B 5. With the help of a second person, hold the console assembly near the Upright (93). Connect the Upright 5 Wire (116) to the console wire (C). See the inset draw- ing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNEC- TORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Next, connect the Upright TV Cable (89) to the console TV cable (D). Insert the wires downward into the Upright (93). C Console D 116 Assembly 89 93 116 B 9