HP 10 Plus 2201us HP 10 Plus 2201 Tablet and HP 10 2101 Tablet - Maintenance a - Page 24

Speakers

Get HP 10 Plus 2201us PDF manuals and user guides View all HP 10 Plus 2201us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Reverse this procedure to install the battery. Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 784328-001 Before removing the speakers, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 15). Remove the speakers: 1. Unsolder the battery cables from the system board in the following sequence: (1) Black battery cable (2) White battery cable (3) Red battery cable 2. Unsolder the left speaker cables (1) from the contact points on the system board. 18 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
Reverse this procedure to install the battery.
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cables)
784328-001
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
15
).
Remove the speakers:
1.
Unsolder the battery cables from the system board in the following sequence:
(1)
Black battery cable
(2)
White battery cable
(3)
Red battery cable
2.
Unsolder the left speaker cables
(1)
from the contact points on the system board.
18
Chapter 5
Removal and replacement procedures