HP 10 Plus 2201us HP 10 Plus 2201 Tablet and HP 10 2101 Tablet - Maintenance a - Page 34
Microphone
View all HP 10 Plus 2201us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Microphone Description Microphone (includes cable and double-sided adhesive) Spare part number 756038-001 Before removing the microphone, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 15). Remove the microphone: 1. Unsolder the battery cables from the system board in the following sequence: (1) Black battery cable (2) White battery cable (3) Red battery cable 2. Unsolder the microphone cables (1) from the contact points on the system board. NOTE: When installing the microphone, the red microphone cable should be soldered to the system board "positive" terminal. The black microphone cable should be soldered to the system board "negative" terminal. 28 Chapter 5 Removal and replacement procedures