HP 14-ac000 Maintenance and Service Guide - Page 47
eMMC drive, To remove the eMMC drive
View all HP 14-ac000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
eMMC drive Description eMMC drive, 32-MB (includes bracket) Spare part number 822381-001 Before removing the eMMC drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 30). 5. Remove the optical drive (see Optical drive on page 31), if installed. 6. Remove the bottom cover (see Bottom cover on page 34). To remove the eMMC drive: 1. Disconnect the drive cable from the system board (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the eMMC drive to the computer. 3. Lift the drive from the computer (3). Component replacement procedures 39