HP 15-f085wm HP 15 Notebook PC Maintenance and Service Guide - Page 58
Remove the four Phillips M3.0×3.5 screws, hard drive rubber bracket from the hard drive
View all HP 15-f085wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3. Release the hard drive connector cable from the clips. NOTE: You will disconnect the hard drive connector cable from the system board when you remove the system board. 4. If it is necessary to disassemble the hard drive, perform the following steps: a. Remove the four Phillips M3.0×3.5 screws (1) from the bracket and separate the front edges of the hard drive rubber bracket from the hard drive b. Disassemblying the hard drive 48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
3.
Release the hard drive connector cable from the clips.
NOTE:
You will disconnect the hard drive connector cable from the system board when you remove
the system board.
4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Remove the four Phillips M3.0×3.5 screws
(1)
from the bracket and separate the front edges of the
hard drive rubber bracket from the hard drive
b.
Disassemblying the hard drive
48
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts