HP 15-f085wm HP 15 Notebook PC Maintenance and Service Guide - Page 80
Remove the display assembly, System board see
View all HP 15-f085wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Optical drive (see Optical drive on page 34). b. Service door (see Service door on page 30). c. WLAN module (see WLAN module on page 32). d. Memory module (see Memory module on page 31). e. Keyboard (see Keyboard on page 36). f. Top cover (see Top cover on page 42). g. Hard drive (see Hard drive on page 46). h. System board (see System board on page 56). Remove the display assembly: 1. Remove the three Phillips M2.5×5.0 screws (1) and Phillips M2.5×2.5 broadhead screw (2) that secures the display assembly to the base enclosure. 2. Remove the display assembly (3). 3. If it is necessary to replace the display bezel or any of the display assembly subcomponents: 70 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts